Cooling Water, Additions

The sample systems need cooling water of good quality to cool the steam and water samples to 25 °C. If the cooling water contains chlorides or hardness this can cause stress corrosion cracking of the coil material or block the cooling water passage in the counter current coolers due to hardness deposits.
By choosing a higher grade material than ss316L for the coils the cracking can be avoided most of the time. Blockage remains a problem. Therefore potable water, brakisch water and seawater used as a coolant will need extra attention.

Closed cooling water loop

• Complete turn key unit, integrated in system or skid mounted
• When only lower quality cooling water is available.
• Filled with demiwater plus additive
• With a moderate temperature ss 316 plate heat exchanger and all components needed.
• Please ask!

Cooling water booster pump

• Complete turn key unit, integrated in system or skid mounted.
• When cooling water supply pressure is too low for the delta p needed (1 bar).
• ss316 materials for wetted parts.
• Please ask.

Chiller unit

• Complete turn key unit, integrated in system or skid mounted.
• Closed loop Cooling water refrigerator unit.
• when no cooling water is available or as a
• secondary cooling when cooling water temperature is too high to achiev 25 °C sample temp.
• Air or water cooled.
• Self regulating to keep the optimal temperature.
• Ex chiller units suitable for hazardous zone’s available !!